Stucco Removal Toronto - Pros/Cons and Some Tips by Painting Contractor
Popcorn ceilings became popular in the 1970s. Back then, contractors installed roofs because they were cheap and easy, plus they hid imperfections and reduced ambient noise in them.
Now
its old fashion, owners choosing stucco ceiling removal Toronto. So
here are some tips and pros/cons.
Pros of Stucco Ceiling Removal:
Increase
Home Value
Since
popcorn caps are no longer popular, they can lower a home's value. However,
many buyers immediately drop their bid price upon seeing a house's popcorn
ceilings.
Removing
the ceilings and leveling the roofs from the flat surface can increase the
buyer's interest and, ultimately, the home's value.
Modern
Search
Stucco Ceiling Removal will
instantly modernize the look of a home. Whether homeowners want to improve the appearance of potential buyers or just for their enjoyment, a smooth surface
ceiling is considered much more aesthetic.
Economic
Renovation
Although
the process requires a considerable time commitment, it is a reasonably
inexpensive remodeling project. Only a few basic sanding, scraping, and
painting tools are needed. The actual cost will depend on the size of the cap.
Cons of Stucco Ceiling Removal:
Paint
Difficulty
Popcorn
ceiling removal
is a much more complex process if the ceiling has been painted. The removal process begins with moisturizing the popcorn material to facilitate
removal.
Because
you cannot correctly wet painted popcorn material, it needs a more extensive
removal process. For that, you need a professional painting contractor.
Labor
Intensive
Popcorn ceilings can be
challenging to remove. It will take homeowners several hours --- and probable
days --- to complete the project, depending on the size of the roof. A ceiling
that has been painted or contains asbestos will take even more time and work.
Asbestos
Possible
Many
popcorn ceilings contain asbestos. The presence of asbestos can make the
removal process more complex and can be dangerous for the people living in the
house during the renovation.
Be
sure to send a small sample of the ceiling to an EPA-certified testing lab to
determine if asbestos is present before you begin renovations.
Supply
List
Before
you start scratching and redrawing, head to your local hardware store, and buy
the following items.
- Plastic
drops
- Painter's
tape
- Ladder
- Protective
equipment
- Pump sprayer
- Ceiling
Texture Scraper
- Composed of
drywall (joint compound)
- Sanding
sponge
- Putty knife
and utility knife
- Large trowel
for a smooth finish
- Texture
sprayer for a textured finish
- White
ceiling paint
- Paintbrushes
- Paint
sprayer (optional)
How to Remove Popcorn Ceilings
Protect the space:
Take
the time to do the preparation work necessary to protect your space
sufficiently. It makes a big difference when cleaning up at the end of the
project, and it also limits your exposure to harmful chemicals.
First,
test your ceiling for asbestos. It is the most crucial step of your project.
If your roof contains asbestos, discard your DIY plans and hire a local
painting contractor Toronto to handle asbestos properly.
Remove
items from the space. Move your furniture out of the room for easy
cleaning.
Position
of the protective screens. Place drop sheets on each part of the floor,
securing them to the base moulding to avoid gaps.
If
you are doing only one piece, consider sticking a drop cloth over the door to
prevent dust from escaping (if you are doing this, be sure to open a window).
Moisten the texture
Moisten
the texture of the popcorn to minimize dust and loosen it from the drywall.
Some people use a spray bottle to spray the ceiling, but a pump sprayer makes
the process a bit easier.
Fill
the sprayer.
You don't need any particular formula. The waterworks are well.
Moisten
five square feet at a time. Lightly spray a little five-foot square
before scraping. Do not use too much water, as this can damage the underlying
drywall. If the texture does not itch quickly, spray a little more water on the
surface.
Wait
10 minutes.
Allow the texture to absorb moisture for about 10 minutes before scraping off.
Scrape the texture
When
the water penetrates enough, the texture should fall from the ceiling with a
slight scratch.
Put
on protective gear. Put on your gloves, mask, and safety glasses
before scratching.
Scrape
in a small square. Start scratching in the area that you have
moistened. Use your ceiling scraper for ease.
Use
your putty and utility knives. For texture in the corners and by moulding,
scrape with a putty knife. For stubborn areas, try using a utility knife to
remove them.
Complete
the room.
Continue to moisten small areas, let the water soak in, and then scrape up the
texture until everything is removed.
Wipe
down the ceiling.
Use a damp paper towel to wipe down the roof. It removes the remaining dust
residue.
Comments
Post a Comment