How to Save Money on wall Painting Tips by Painter in Toronto
In search of ways to save at least a part of the
family budget allocated for home decoration, asked yourself: can I do some work
by yourself, without involving a hired house painter in Toronto.
To know each
and everything about How to save money on wall painting tips by a house painter.
Preparatory stage
·
Paint in sufficient quantity, you need to
calculate the volume of material as correctly as possible, because if there is
not enough paint and you buy more, then there may be a difference in shades
during tinting, and an unpleasant surprise will come out. Click here to
know: how to
calculate the volume of paint required
·
Primer for preliminary preparation of
walls,
·
A roller with a telescopic handle, the
difference in price is negligible, but it will save you from exercising with a
stepladder or stool,
·
Several removable rollers of different
widths, this is especially true if the walls have protrusions and complex
geometry, they are often sold immediately in a set,
·
A tray for paint and a grate for removing
excess, these are necessary things, they will help to avoid unnecessary waste
of material and drips on the walls, as well as splashes on all other surfaces,
·
Spatulas of different widths to outline
straight lines, if necessary,
·
Masking tape to protect the ceiling or
other structures,
·
Cling film.
Which paint to choose for your type of room
The composition, properties, and characteristics
of the paint directly depend on the room in which you will use it, and on your
personal preferences. In hardware stores, the choice is huge, let's focus on
the most popular options.
Water-based paint
As a rule, it is sold in white and can be easily
tinted in any desired color and shade. The water emulsion has many advantages:
a beautiful matte or glossy texture, easy to apply and dries quickly,
environmentally friendly, does not smell, is vapor permeable, which allows you
to maintain a healthy microclimate in the room, does not fade, is moisture
resistant, washes and lasts for a long time - up to 10 years. Spills, hands,
tools are easily washed off. Of the shortcomings - you can paint only at
positive temperatures.
Water-dispersion paint
It has all the advantages of a water-based
emulsion, and even more resistant to abrasion and washing.
Oil paint
It is very popular amongst house painters in Toronto,
but now it is bought less often because of its pungent smell and the ability to
exfoliate over time.
The consistency allows you to get by with one
layer of application to achieve the desired result. If there are surpluses on
the roller, noticeable and difficult to remove drips will form on the walls.
Dries for a long time.
Enamel paint
It is appreciated for its high decorative effect
due to its glossiness, it can be used on a variety of materials, and however,
modern manufacturers also offer semi-matt enamels. Ideal for rooms with high
humidity or requiring frequent cleaning.
Regardless of the choice of the paint itself, the
process of applying it to the walls will be approximately the same. It is
important to follow the sequence of all stages, and then you are guaranteed to
get an excellent result.
Preparing walls for painting
Carefully inspect the entire area of the upcoming
work for irregularities, scratches, and other blemishes from plasterers. Paint
will help hide some of them, while others, on the contrary, will make it more
noticeable. Much, of course, depends on the shade you choose - darker flaws are
more noticeable.
If necessary, go over with sandpaper or a special
tool for grouting the walls, do not worry that dust will remain on the surface;
the primer will handle it perfectly. In no case can you skip this stage, the
universal primer for interior work additionally evens the surface, reduces the
porosity of the plaster, which reduces paint consumption, and at the same time
increases the adhesion between the wall and the decorative layer.
Before starting work, it is worth closing the
floor and ceiling if they already have a final finish. You can use plastic
wrap, securing it with masking tape. If there are sockets and switches, they
should also be removed and de-energized, or covered with foil.
LIFE HACK: use ordinary cling film in
your work, cover the paint tray with it and simply remove it at the end of the
work. The pallet will remain clean. A cover used brushes and rollers with
plastic during breaks, they will not dry out.
Priming and painting are very similar. Pour 2/3
of the volume of the primer into the pallet. Lower the roller and roll it
carefully. It should be completely hydrated, but there should be no excess
either. To do this, you need to squeeze the roller, rolling it either on a
special grid or simply along a special edge of the pallet. After that, we
proceed to apply the primer to the walls. Although at this stage it is not so
important, the main thing is not to allow "bald spots". In the
corners, close to the floor and ceiling, it will not be possible to roll
everything with a roller, so you need to use a brush of suitable width. At the
end of the work, you need to wash the tools, they can be used further, we let
the walls dry out for a day, if necessary, apply a second layer of primer.
By the way, for damp basements or bathrooms, it
makes sense to buy a primer with special antifungal additives.
Paint the walls with a roller
Many are worried that they, and even with a
roller, will never achieve the same evenness of staining as with professionals
with a spray gun.
House painter will not say anything about colors and design; this is a matter of
taste and style of the interior of your house. Let’s check out here: Best
House Paint Colors Suggestion by House Painter
After the primer has completely dried, we repeat
the entire sequence, only this time with paint. We start from corners and
hard-to-reach places, painting over them with a brush wide enough so that later
we will level with a roller. It is more convenient to paint with a brush,
picking up paint from a small can, pouring a little into a free container from
the main bucket.
We paint with a roller from the window, using
maximum lighting, to see the quality of the work, it is better to avoid direct
sunlight.
Pour the paint into the pallet, carefully
saturate the roller with it, remove the excess, and begin to apply it to the
wall. It is important to completely cover the surface with the first layer, so
you can move the roller diagonally or horizontally.
With the second layer, paint only with vertical
lines, so the surface of the wall is guaranteed to be uniform. Of course, let
the first layer dry. When using thick, for example, oil paint, it is
recommended to do three coats by the painter in Toronto.
Comments
Post a Comment