How to Paint Wooden Floor by Toronto Painter for House

 

Painting wood floors can be quick and easy with the right painting tools, and guidance by Toronto painter for house.

A simple wood surface preparation, followed by the easy application of floor paint, will give your wood floor a new look. 

You can select any color to complement the design of your room. With a little patience and attention to detail, hardwood floors can be painted with an easy clean-up at the end.

Let’s know the step by step guide on How to paint wooden floor by Toronto Painters.

In This Article

• Choose the right color
• Choose the right paint
• Prepare the floor for painting
• Get the necessary painting tools
• Procedure for painting wood floors
• Painting techniques and styles

Choose the right color

This will depend on the effect you want to give to your environment, the color of the decoration you have chosen, and also the room. 

You have unlimited options but one piece of advice. All I can give you is to use design colors that are the classic colors for wooden floors that will make everything have harmony. That, in turn, agree with any decoration you may have in the future, right you think? 

You can also use more than one color and paint in stripes or with the design that you like the most.

Choose the right paint

Wood floors have special paint for painting on wood which is different from other paints. This helps to prevent it from scratching and external damage and also protected it from hairline cracks.

Click here to know and Buy the right amount of paint

Prepare the floor for painting

The secret to painting floors is to prepare them well before painting. Start by washing the floor to remove all dirt, and then you would have to sand it well to remove all the varnish and imperfections it may have and, last, vacuum it to remove the dust. 

Do you already have it ready?

Get the necessary painting tools

Although using a roller can save your lot of time, it is not the most suitable tool for painting a wooden floor since it will leave parts unpainted and you will have to touch up later with a brush; then, it is best to use a 10-centimeter wide brush to give your floor the finish you are looking for. 

According to House Painter in Toronto in order not to damage your back while painting, it would be good if you get a long handle to place the brush and not have to paint on your knees. Have everything? So let's get started!

Procedure for painting wood floors

The first step is to remove the old layer of wax or varnish cover or even the laminated that has been damaged. When removing the coating, use gentle solvents on the wood. 

If possible, choose water-based and non-acidic ones to avoid staining the wood.

If you notice chips or damaged, missing pieces, fill them with wood putty. 

Apply, let dry as much as you can (if it is from one day to the next, much better), and sand again, to leave a neat work surface.

Since we have "washed" the wood, we must apply a sealing product, which closes the pores and smooths the wood grain. 

Apply the sealant (the primer, fixer, or whatever, always water-based) always starting from the corner farthest from the door, and in that direction.

Painting techniques and styles

There are many techniques of paint that we can add to simple hardwood floors. We can imitate ceramic, marble, stone, and tile finishes, or gives it a modern style in a simile vinyl finish.

Before painting wood floors, while you let the fixer dry, think about the design your floor will have. You can perform the stenciling technique, or create a linear or geometric pattern, using low-contact adhesive tapes to mark the “tiles” or patterns to follow. 

Remember that if you want to make gradients, you must apply the first color, then retarder, and then the next color, without letting it dry in the middle. If you don't want gradients, but you do want several colors, let one dry well to proceed to the next.

The paint is ready, let it dry for no less than half a day. Next, apply the protective varnish, which can be matt, satin, or gloss varnish, to your liking, always requesting that it be for exteriors or floors so that it has better resistance to foot traffic. 

Apply two to three coats of varnish, allowing them to dry perfectly between them.